Automotive Cables to ISO, SAEJ, JASO D Automotive Cables. APPLICATIONS OVERVIEW. Standard wall automotive cables are ideal for use in. AVSS Automotive Wire JASO D Construction (No./mm), calculated area ( mm2), Outer Diameter (mm), Standard (mm), Min. (mm), Standard (mm), Max. AVSS Japanese Standard Automotive Cable Conductor:Cu-ETP1 bare according to JIS Insulation:PVC Standard Compliance:JASO D

Author: Ferg Fenrira
Country: Martinique
Language: English (Spanish)
Genre: Spiritual
Published (Last): 5 September 2013
Pages: 13
PDF File Size: 17.91 Mb
ePub File Size: 16.22 Mb
ISBN: 483-8-91480-283-3
Downloads: 67194
Price: Free* [*Free Regsitration Required]
Uploader: Vudodal

All matters such as the testing method and testing jig shall be handled as common knowledge.


Performance Cable performance shall be as specified in Tables 2 to 7. At the time of establishment, thin wall low-voltage cables generally called AVS that have thinner insulation covering and thin wires with a conductor sectional area of 5 mm2 or less were widely used to reduce the weight and size of wire harnesses for automobiles.

The situations are described below. Outline and background of revision 1. The conductor shall not be exposed in the winding jas in 6.

Wire Cable, Jaso D611 Standards Avss Type Automotive Wire PVC Insulation, Wire Harness

The English name was also changed from “Low-tension cables with thin wall insulation for automobiles” to “Unscreened low-voltage cable. The construction shall conform to the applicable standard in Tables 11 to 25 when the test is conducted according to Item 6.

However, since cables are actually handled with these multiple symbols, serial indication of multiple symbols was adopted to avoid confusion. In addition, this standard does not specify standsrd of the rated voltage on the cable itself or packaging.


The burning cable shall self extinguish within 30 seconds after exposure to naked flame.

China UL, Jaso D Standards AVS Type Automotive Wire – China PVC Jacket, Automotive Wire

The types and symbols are summarized and described in Table 1. For the insulation materials, polyvinyl chloride mixture, halogen-free mixture, cross-linked PVC mixture, heat resistant PVC mixture, and cross-linked polyethylene mixture are used depending on the heat resistance class, and have a different temperature rating. For this reason, further reviews shall be conducted to investigate them at every opportunity.

Especially for the short-term aging test, heat load test, and heat resistance test that are under revision deliberation in ISOit is important to insist on the Japanese position to facilitate standard conformance.

Details of specified items in specified elements 5. The identification mark shall be readable after the specified test. Issues arising during study 2.

Extremely thin wall type cross-linked polyethylene insulated heat resistant low-voltage cables for automobiles Note 2: The insulation shall not be fractured in the voltage resistance test in 6.

title – Automotive Cables to ISO, SAEJ, JASO D

Conductor Number of Calculated Nominal Approx. The heat resistance A test shall be conducted in accordance with the method specified in 5. This is caused by the difference in the concept of temperature resistance as shown in Note 2 of Table 1, and it was determined to describe both values separately depending on the cable types.

Compressed conductor ultra thin wall halogen-free insulated low-voltage cables for automobiles EB: Stnadard, in this revision, standards for rated voltage of 25 VAC and 60 VDC are provided mainly for cables with thin insulation covering specified by JASO according to the international standard.


Thin wall low-voltage cables “type 1” for jjaso 0.

stanxard Minimum values shall be as specified in Table 8. The heat resistance C test shall be conducted in accordance with the method specified in 5.

Construction and material 5. Initially, the international standard ISO for automotive cables also contained no specifications about rated voltage, but in the revision innew rated voltage classes of 60 V and V were provided and their voltage resistance requirements were clearly specified considering the development of new 42 V automotive electric system and the expanding trend of electric vehicles. Therefore, all materials are described in Table 1. Standsrd shall be organized at the next regular review of the standard.

When the kaso of outside diameter changer is measured after the specified test and subsequently the winding test in 6. Minimum volume resistivity shall be ? Matters related to patent rights This standard includes no matters related to patent rights.

Cross-linked vinyl insulated heat resistant earth bond low-voltage cables for automobiles AEX: For other fuels, the test shall be performed upon an agreement between the parties involved in delivery. However, the standardd material for nominal size 0.

Author: admin